A1 Cable Display Kit | PHC LONDON
A1 Cable Display Kit
search
  • A1 Cable Display Kit
  • A1 Cable Display Kit
  • A1 Cable Display Kit
  • A1 Cable Display Kit
  • A1 Cable Display Kit

A1 Cable Display Kit

£72.00
  • A1 Display Pocket poster holder Portrait & landscape Kit.
  • Its Ready to use solution.
  • Double-Side window cable display system complete kit is ready to use.
  • if you are using the kit in the window,you can put 2 A1 posters back to back one.
  • This kit is easy to fit, easy to change the posters without any screwing.
  • You just have to pull out old poster & slide in new by opening the pocket from top with hand.

Variation: With 1 pockets Portrait
Quantity

100% secure payments

A1 Display Pocket COMPLETE KIT IS READY TO USE.

  • Double-Sided window wire rope cable display system complete kit which is READY TO USE.
  • If you are using the kit in the window,you can put 2 A1 Portrait posters (Height 841 x  Width 594 mm OR Height 33.10 x Width 23.40 in) OR 2 A1 LANDSCAPE posters (Height 594 x  Width 841 mm OR Height 23.40 x Width 33.10 in)back to back one faces inward & one faces outward.
  • A1 Cable Display Kit is easy to fit, easy to change the posters without any unscrewing & screwing.This kit is ideal for display at offices, shops, cafes and pubs, estate agents, point of sales, school, college, university.

A1 Cable Display Kit includes:

  • Poster pocket or holder (As per option you choose)
  • 2 Ceiling to floor cables 4 meters long each which you can cut into any size.
  • Poster holding fittings are 4 per pocket.

These are High-Quality Fittings which are made up of Brass & polish chrome.Cable displays Ceiling to floor which are very easy to install.

  • If you will un tight ceiling part it will split into 2 pieces. Similarly if you will un-tight floor part it will also split into 2 pieces.
  • Screw Brass part into the ceiling and tighten chrome part on it so brass would be hidden under the chrome cap.
  • Suspend cable from ceiling part & pass-through from the cap of the bottom part. By tightening the cylinder screws you can cut the cable to size attach the cylinder at the end of the cable.
  • In the end, screw the bottom part of the floor fitting into the floor and top part tight in it. There is a spring inside the top part of floor fixing which give tension to the cable and make the cable straight & tight.
  • To make column & attach 4-panel support per pocket 2 on left cable & 2 on right cable ,install 2 cables ceiling to floor.
100 Items

Specific References

MPN
ACDK0156
Comments (0)