

Clip Rail Mounting-Clips are designed to securely attach your tracking system to walls. Depending on the material, the number of clips required varies: 3 clips per meter for Brass Mounting-clips and 4 clips per meter for Nylon Mounting-clips. Ensure you have the right amount for sturdy installation!
"Marking: Decide where you want your rail. Mark points every 25 to 30 cm along the wall.
Drilling: At each marked point, drill a hole.
Insert Wall Plugs: Place the wall plugs into the drilled holes.
Set Up Mounting-clip: Position a Mounting-clip with its flat side against the wall, place a screw inside, and secure it to the wall. Repeat for all drilled holes.
Attach the Tracking: Align the top-edge of the tracking's rear slot over the Mounting-clips. Push downwards until it ""clicks"" into place. For Brass Mounting Clips, you might need to use a mallet or a soft piece of wood to apply extra force.
Choose the Right Clip: While Nylon Mounting Clips are apt for standard picture hanging, Brass Mounting Clips offer enhanced strength, allowing you to maximize your tracking's capacity.
Remember: Use 3 Brass Mounting Clips or 4 Nylon Mounting Clips per meter of rail for a robust setup!"