A1 LED Display Pocket Ceiling Kit

• A1 LED Display Lighting Pocket portrait or landscape.
• High quality made in UK.
• Complete kit ready to use.
• Advantage of this kit is, you don't need to screw anything on the floor. Even you can feed electric connection from the ceiling. You can easily hide electric cables & led driver inside ceiling if you have suspended ceiling or with normal ceiling you can put skirting on ceiling to hide electric cables.
• Double-Sided LED window cable display system complete kit READY TO USE. You can put 2 A1 Portrait posters (Height 841 x  Width 594 mm OR Height 33.10 x Width 23.40 in) OR 2 A1 LANDSCAPE posters (Height 594 x  Width 841 mm OR Height 23.40 x Width 33.10 in)back to back one faces inward & one faces outward if you are using the kit in the window. Easy to fit, easy to change the posters without any unscrewing & screwing. Ideal for display at offices, shops, cafes and pubs, they are also incredible to deliver important communications directly to your customers. Ideal for display at offices, shops, cafes and pubs.

Kit includes:

1. LED poster pocket or holder (As per Chooses option)
2. LED driver or transformer included with 5 Meter-electric wire with 3 pin plug. (You can increase the length of wire as per your requirement.
3. 2 Ceiling cables 2 meters long each which you can cut to size.
4. Poster holding fittings 4 per pocket.
5. High-Quality Fittings made with Brass & polish chrome.

Cable displays Ceiling easy to install:

1. Un tight ceiling part it will split into 2 pieces.
2. Screw Brass part into the ceiling and tighten chrome part on it so brass would be hidden under the chrome cap.
3. Suspend cable from ceiling part & attach the pocket & cut the cable to size.
4. Install 2 ceiling cables column & attach 4-panel support per pocket 2 on left cable & 2 on right cable.
5. Attaching the electricity to the kit is very easy & simple 2 cables will come out from LED driver with wire connectors which you attach with each ceiling cable next to ceiling part by tightening the grub screw. From 2nd end of the LED driver, the 5-meter electric wire will come out with a 3 pin plug at the end. You just plug in this plug to an electric socket to light the pockets.