A0 Ceiling To Floor Rod Display

• To access or change prints are very easy, no unscrewing needed. Each pocket opens from the top to insert or replace prints and allows you to put 2 prints back to back one faces inward one face outward if you installing in the window.
• High Quality Fittings made with Brass & polish chrome. These magic fittings help you create any type of display. Rod displays Ceiling to floor Ideal for window displays estate agent displays education sector office displays retail and shop display, window hanging glass shelf system.

Easy to install:

• Untighten the ceiling part it will split into 2 pieces (Brass part + Chrome cap). Similarly, the untightened floor part will also split into 2 pieces (Top part + Bottom part).
• Screw Brass part in to the ceiling and tight 2nd part on it so brass would be hidden inside the chrome cap.
• Screw rod in to ceiling chrome cap which has thread inside & suspend. Pass through the rod from the top part of floor fixing. Cut the rod to size.
• Lastly screw the bottom part of the floor fitting into the floor and top part of floor fixing tight into it.
• Each kit comes with 4 rods 6mm thick X1.5m you screw 2 rods of 1.5m  together to make 3 meter long  IF YOU NEED RODS LONGER THAN 3 METER THEN BY EXTRA RODS & SCREW TOGETHER EACH ROD HAS MALE & FEMALE THREAD) , 2 sets of ceiling & floor FITTINGS and panel & panel supports as per selected quantity of acrylic pockets

Dimensions:

• Portrait A0 Width 841MM x Height 1189MM   
• Landscape A0 width 1189MM x Height 841MM.