Make your office clean and organized with our suspended glass office shelving system.
It’s an essential part of modern offices where designers don’t like to use old style MDF shelf units or T-Slot Shelving, Industrial Shelving. Left & right cables are available which keep your files safe from falling left & right.
These shelves are easy to install.
At required level,screw wall mounted shelf supports in to the wall.
Attach shelf support to the front corners of glass shelf.
If you will un tight the cable fitting it will split in to 2 pieces.
If you cannot screw 6 inches above,screw brass part in to the wall 6 inches above the first shelf or where ever is convenient for you.
You can screw this in to the ceiling with screw.
Tight chrome part on brass part & suspend cable.
You can cut the cable into any size.
Slide in the glass shelf to wall mounted shelf supports & tighten the bottom screws.
In the end, pass through the cable from the slot of cable shelf support which already attached to the front corners of glass shelf.
If installing only one shelf,tighten the grub screws & cut the extra cable.
Don’t cut the cable,if you like to put shelves one above other.
Install 2ND shelf with wall mounted supports, pass through the cable from front cable shelf supports tighten the grub screw.
Similarly you can install as many as you like shelves one above other & side cables will finish inside the front cable shelf supports of bottom glass shelf.
100 Items
Specific References
MPN
OGS0268
Comments (0)
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.