A3 LED Display Pocket Ceiling To Floor Kit

• A3 LED Display Pocket COMPLETE KIT READY TO USE. High quality made in UK.
• Double-Sided LED window cable wire rope display system complete kit READY TO USE.
• You can put 2 A3 Portrait posters (Height 420 x  Width 297 mm OR Height 16.5 x Width 11.7 in) OR 2 A3 LANDSCAPE posters (Height 297 x  Width 420 mm OR Height 11.7 x Width 16.5 in)back to back one faces inward & one faces outward if you are using the kit in the window.
• Easy to fit, easy to change the posters without any unscrewing & screwing.
• Ideal for display at offices, shops, cafes and pubs, they are also incredible to deliver important communications directly to your customers. Ideal for display at offices, shops, cafes and pubs.

Kit includes:

1. LED poster pocket or holder (As per Chooses option)
2. LED driver or transformer included with 5 Meter-electric wire with 3 pin plug. (You can increase the length of wire as per your requirement.
3. 2 Ceiling to floor cables 4 meters long each which you can cut to size.
4. Poster holding fittings 4 per pocket.
5. High-Quality Fittings made with Brass & polish chrome.

Cable displays Ceiling to floor Easy to install:

1. Un tight ceiling part it will split into 2 pieces. Similarly un-tight floor part it will also split into 2 pieces.
2. Screw Brass part into the ceiling and tighten chrome part on it so brass would be hidden under the chrome cap.
3. Suspend cable from ceiling part & pass-through from the cap of the bottom part. Cut the cable to size attach the cylinder at the end of the cable by tightening the cylinder screws.
4. Lastly, screw the bottom part of the floor fitting into the floor and top part tight in it. Spring inside the top part of floor fixing give tension to the cable and make the cable straight & tight.
5. Install 2 cables ceiling to floor to make column & attach 4-panel support per pocket 2 on left cable & 2 on right cable.
6. Attaching the electricity to the kit is very easy & simple 2 cables will come out from LED driver with wire connectors which you attach with each ceiling to floor cable next to floor part by tightening the grub screw. From 2nd end of the LED driver, the 5-meter wire will come out with a 3 pin plug ta the end. You just plug in this plug to an electric socket to light the pockets.