Utilize multiple Black Wall Rug Supports to effectively display carpets, tapestries, and various textiles on your walls. These versatile black wall rug supports are suitable for installation on various wall surfaces, making them ideal for showcasing heavy rugs, carpets, banners, signage, wall-mounted wooden panels, mirrors, and glass. These reliable black carpet clamps securely affix to the wall, providing stability for your tapestry hanger and fabric wall hangings."" How does this carpet hanger work?

Unscrew/separate the Wall Rug Support's Chrome CAP from its screw mount - The brass screw mount sits inside the cap.

Install the screw mounts to the wall based on your Rugs width!

Place the support's CAP back onto the screw mount, and tighten the small Hex / allen key bolt to secure them together.

(Best accomplished with 2+ people) lift the carpet below the supports. Place a 'plastic insert' followed by one corner of the rug into the support, and tighten the bolt with an Allen / Hex key.

Note: A minimum of 4 supports is vital when hanging mirror glass & panels for safety (to avoid breakages in daily use!)

Wall Rug Tapestry Hanger Support Installation Guide

• Wall Rug Support Kit (includes Chrome CAP, brass screw mount, plastic insert, and hex/allen key bolt)
• Measuring tape
• Pencil or marker
• Drill and appropriate drill bits
• Screwdriver
• Level (optional, for alignment)
• Allen/Hex key (provided in the kit)
• Plastic inserts (provided in the kit)
• Assistance from at least one other person (recommended)

Step-by-Step Instructions:

Step 1: Unscrew/separate the CAP of taoestry hanger from the Brass Screw Mount using allen key

1. Hold the Wall Rug Hanging Support in your hand.
2. Locate the small hex/allen key bolt on the rug support CAP.
3. Use the provided Allen/Hex key to loosen and remove the bolt.
4. Gently separate the Chrome CAP from the brass screw mount. The screw mount sits inside the cap.

Step 2: Install the Screw Mounts to the Wall

1. Measure the width of your rug or panel to determine the spacing for the supports. You will need 1 support at every 30 cm and you will need at least 2 supports to hang a small tapestry
2. Place supports at each corner and evenly spaced along the top edge.
3. Mark the wall with a pencil or marker where the screw mounts will be installed.
4. Use a drill to create pilot holes at the marked locations.
5. Secure the brass screw mounts to the wall using screws and a screwdriver. Ensure they are tightly fastened and level.

Step 3: Reattach the Chrome CAP to the Screw Mount

1. Place the rug support CAP back onto the installed brass screw mount.
2. Insert the small hex/allen key bolt through the cap and into the screw mount.
3. Tighten the bolt using the Allen/Hex key to secure the cap to the mount. Do not fully tighten yet; leave it slightly loose for adjustment.

Step 4: Lift and Secure the Rug or Tapestry

1. With the help of at least one other person, carefully lift the rug or Tapestry into position below the supports.
2. Insert the provided plastic insert into the support to protect the rug or Tapestry from damage.
3. Place one corner of the rug or Tapestry into the support, ensuring it is properly seated.
4. Tighten the hex/allen key bolt to secure the rug or Tapestry in place. Repeat for all supports.

Tips for Success:

• Always use a minimum of 4 supports for heavy items like big rugs textile or tapestries.
• Work with at least one other person to make lifting and positioning easier.
• Use a level to ensure the rug or panel is hung straight.
• Periodically check the tightness of the bolts to ensure the rug or panel remains secure over time.