Rug Hanging Clip for thin and light weight Rugs, Carpets, Tapestry. Easy to use no electric tool required only need small hammer to hang rug. Suitable for up to 4mm thick rug. Attach clip after 60CM or 24 Inches and hang on wall with nails.

tapestry wall hanging clips rug hanging supports Ideal to use at home. 

There is no need for drill to screw into the wall. 

Simply hang with Nails.

This Rug clip can hold up to 10kg of weight capacity if you apply clip after 45CM or 18inches. For normal weight rug or fabric hanging you can apply clip after 60CM .

Very easy to use - just open the clip, Slide in your rug in to the clip and snap shut the clip.

This Clip is designed to support rugs up to 4mm in thickness.

Thin Tapestry Hanger Clips Installation Guide

Tools and Materials Needed to install rug/tapestry hanging clips:

• Tapestry Hanger Clips
• Nails or picture hooks (depending on your wall type)
• Hammer
• Measuring tape
• Rug, tapestry, or fabric wall hanging (up to 4mm thickness)

Step-by-Step Installation Guide:

Step 1: Plan Your Hanging Layout

1. Measure the width of your rug, textile or tapestry.
2. For heavy rugs, textile or tapestry (up to 10kg capacity): Install clips at every 45cm (18 inches) for optimal support to hang perfectly.
3. For lighter rugs or tapestries lighter than 10 kg: Place clips every 60cm (24 inches) for better support.
4. Mark the positions on the wall with pen or pencil where the nails will be inserted, ensuring they are level and evenly spaced.

Step 2: Install the Nails

1. Hammer nails into the wall at the marked positions in previous step.
2. Ensure the nails are securely placed to hold the weight of your rug or tapestry and make sure that the wall is strong enough to hold the weight of tapestry.
3. If your wall requires it, use screws and plugs.

Step 3: Attach the Tapestry Hanger Clips

1. Open the clip by gently pulling the front part away from the base.
2. Slide the edge of your rug or tapestry into the clip, ensuring it is positioned securely.
3. Snap the clip shut to hold the fabric firmly in place.
4. The clips are designed to support rugs or fabrics up to 4mm in thickness.

Step 4: Hang Your Rug or Tapestry

1. Lift the rug or tapestry with the attached clips and hang it on the nails or hooks.
2. Adjust the positioning to ensure it hangs straight and evenly.